• QQ:3069405850
  • WeChat:0086-18561839011
Email:greatwheel05@great-group.net Great Int'l Holdings Limited

Great Int'l Holdings Limited

Product Categories
Contact Us

Great Int'l Holdings Limited

Address:606RM, Crown City, No.216, Changjiang Road, Qingdao Development Zone, Shandong, China





Forklift Wheel Wheeled Vehicles

Forklift Wheel Wheeled vehicles

Forklift trucks are industrial transport vehicles, refers to the goods for the pallet cargo handling, stacking and short-distance transport operations of various wheeled vehicles.

International Organization for Standardization ISO / TC110 is called industrial vehicles. Commonly used in the storage of large items of transport, usually using fuel or battery drive.

The technical parameters of the forklift are used to indicate the structural characteristics and performance of the forklift. The main technical parameters are: from the rated weight, load center distance, the maximum lifting height, gantry inclination, the maximum speed, the minimum turning radius, the minimum ground clearance and wheelbase, track and so on.

1, rated lifting capacity: the rated weight of the forklift truck is the weight of the cargo to the fork before the wall of the distance is not greater than the load center distance, allowing the maximum weight of goods to rise, expressed in T (tons). When the cargo center of gravity on the fork exceeds the specified load center distance, due to the vertical stability of the forklift, the weight should be reduced accordingly.

2, the load center distance: the load center distance is placed on the fork on the standard goods, the center of gravity to the vertical section of the vertical section of the horizontal distance T, in mm (mm) said. For 1T to 4T forklift specified load center distance of 500mm.

3, the maximum lifting height: the maximum lifting height refers to the flat on a solid ground, the forklift full load, the goods rose to the highest position, the fork on the upper surface of the horizontal distance from the horizontal distance of the forklift.

4, Mast angle: Mast tilt refers to the forklift on a flat solid ground, the mast relative to its vertical position forward or backward the maximum inclination. The role of the anteversion is to facilitate the fork and unloading of goods; the role of the tilt angle when the forklift with cargo operation, the prevention of goods from the fork on the fall. General forklift angle of 3 ° ~ 6 °, rear tilt of 10 ° ~ 12 °.

5, the maximum lifting speed: forklift maximum lifting speed usually refers to the full load when the forklift, the maximum speed of the goods rise to m / min (m / min) said. Improve the maximum lifting speed, can improve operational efficiency, but the lifting speed is too fast, prone to cargo damage and machine damage accident. At present, the maximum lifting speed of domestic forklifts has increased to 20m / min.

6, the maximum speed: to improve the speed of the forklift to improve the efficiency of operations have a great impact. For the internal combustion forklift with a capacity of 1T, the maximum speed of full load is not less than 17m / min.

7, the minimum turning radius: When the forklift in the no-load low speed, playing the steering wheel turn, the car's outermost and the innermost to the turning center of the minimum distance, respectively, the minimum outside the turning radius Rmin and the minimum inside the radius of turning rmin The The smaller the smaller the radius of the outside corner, the smaller the floor area required for the forklift, the better the mobility.

8, the minimum ground clearance: the minimum ground clearance refers to the wheel outside the car on the fixed point of the lowest point to the ground, it means that the forklift without a collision across the ground to highlight the ability of obstacles. The greater the distance from the ground clearance, the higher the passage of the forklift.

Copyright © Great Int'l Holdings Limited All rights reserved.
QR Code